%
O01000 (SERVICE FACE OFF UMC 1000)
(2-05-25)
(3 HRPP SHELL MILL)
(DYKEM FACES BEFORE CUTTING)
(USES G54, X,Y0 IS CENTER OF PALLET)
#5223=0(MAKE SURE NO Z OFFSET IN COORDINATE SYSTEM)
(TOUCH OFF FACE FOR Z, LOAD INTO TOOL OFFSET)


G00 G17 G20 G40 G80 G90
G53 Z0.
G53 Y0.
M11
M13
G91 G28 B0. C0.


(FACE OFF BACK SIDE B0)
N1 (LOAD OFFSET INTO TOOL IN SPINDLE)
G54 G17 G90
S604 M03
G00 B0. C0.
M10
M12
G187 P3
X-7.75 Y12.2 
G43 H#3026 Z1.
Z.2
G94 G01 Z0. F100.
X7.8043 F28.99
X10.25 Y10.14 F100.
X-10.25 F28.99
X-12.25 Y7.84 F100.
X12.25 F28.99
X13.25 Y5.54 F100.
X-13.25 F28.99
X-14. Y3.24 F100.
X14. F28.99
X14.25 Y.94 F100.
X-14.25 F28.99
G00 Z1.
G0 G90 C180.(ROTATE FOR OTHER SIDE)
(FACE OFF BACK SIDE B180)
X-7.75 Y12.2 
Z.2
G01 Z0. F100.
X7.8043 F28.99
X10.25 Y10.14 F100.
X-10.25 F28.99
X-12.25 Y7.84 F100.
X12.25 F28.99
X13.25 Y5.54 F100.
X-13.25 F28.99
X-14. Y3.24 F100.
X14. F28.99
X14.25 Y.94 F100.
X-14.25 F28.99
G00 Z1.
G187
M05
G53 Z0.
G53 Y0.
M11
M13
G91 G28 B0. C0.
M10
M12
G90
M30

%